|
|
|
S400, S410
Safety Hinge Switches
 |
S400 series Safety Hinge Switches are used for position monitoring of hard guards that can rotate (e.g. protective hoods) with a monitoring switch (without guard interlocking) integrated into the hinge.
The S400 Safety Hinge Switches unite the Safety Switch and door hinge functions in one component. This Safety Switch is used with machines with small stopping times, depending on the distance to the point of operation. As external actuators are not required with this Switch, it can also be used problem-free in environments with high dust concentration levels or with heavy particle loads.
The Switch is extremely compact, but robust at the same time, and therefore predestined for numerous applications. It also boasts a simple switching angle alignment. If, for example, doors are to be moved or aligned later on, realignment is no problem. The covered screws of the S400 Safety Hinge Switch ensure that it is highly tamperproof.
|
| Special features |
- Contact sets for integration up to category 4 in accordance with EN ISO 13849
- Maximum opening angle of the protective device, 180°
- Repeatable setting (switching angle alignment) with moved or misaligned doors
- Protection rating: IP 67
- Compact, rounded-off construction design in robust metal version
- Encapsulated, internal actuator guarantees proper functioning, even under difficult conditions
- Extremely manipulation-safe with covered screws (unobtrusive sturdy design with rear-side mounting)
|
| Important technical data, overview |
| Switch type |
Interlock device without guard interlocking in accordance with EN 1088 |
| Housing material |
Metal |
| Loads/stresses |
1500 Nm (axial), 1000 Nm (radial), 25 Nm (torsional) |
| Contact allocation |
2 NC  + 1 NO |
| Switching principle |
Creep contact, snap-action contact |
| Internal actuator |
Safety Switch in hinge, encapsulated |
| Actuation angle |
Max. 180° |
| Connection system |
Cable, M12 plug |
| Protection rating |
IP 67 |
| Functions |
- Interlock device without guard interlocking in accordance with EN 1088
- Integration in control circuits up to category 4 in accordance with EN ISO 13849
- Mechanical hinge with integrated Safety Switch
|
|
|
|
