ERS200

E-STOP Rope Switch


ERS200 - E-STOP Rope Switch
CE IMQ cUL US listed CCC

For stopping in emergencies ENISO 12100-1 stipulates protective devices and supplementary measures, such as E-STOP buttons or emergency rope switches, for example.

The E-STOP function may not be used here as a substitute for protective devices or other safety functions. The ERS200 E-STOP Rope Switch is used with preference with expansive points of operation. Its rope pull activation guarantees that it is easy to reach and activate all along the point of operation.

The switch's alignment indicator ensures that it is easy to set. The ERS 200 variants enable integration in control circuits up to category 4 in accordance with EN ISO 13849.


Special features
  • Contact sets for integration up to category 4 in accordance with EN ISO 13849

  • Pulling the rope or rope fracture safely stops the machine

  • Simple setup through switching point indicator

  • Easy integration with 3 cable approach directions

  • Clicks in on both sides with friction-locking contacts

  • Compact metal housing

  • Protection rating: IP 67

Important technical data, overview
Switch type E-STOP command device in accordance with EN 60947-5-5
Housing material Metal
Contact allocation 1 NC + 1 NO
2 NC + 1 NO
2 NC
Switching principle Creep contact
Internal actuator E-STOP Rope Switch
Actuation force (extraction) 83 N, 235 N
Actuation force (slacken) 63 N, 147 N
Actuation force (pull-out with forced separation) 90 N, 250 N
Connection system M20x1.5 (3-way)
Protection rating IP 67

Functions
  • E-STOP command device in accordance with EN 60947-5-5

  • Integration in control circuits up to category 4 in accordance with EN ISO 13849

  • Position-independent E-STOP command input

  • Reset function (reset button with indicator)

  • Rope head with alignment indicator